SP 10 / SP 25

max discharge
up to 48 m3/hour / 60 m3/hour

discharge size
up to 2″ / 2-1/2″

weight
22 / 32 kgs

Pneumatic Centrifugal Pump

OVERVIEW

Teryair Pneumatic Centrifugal Pumps are used to empty ballast tanks, bilge wells, etc. Often used for draining cargo holds during and after the washing procedure. Teryair Centrifugal pumps have a small cross-section and hence can be lowered into areas having small access hatches. Especially preferred where an eclectic spark may risk ignition or explosion. Required air pressure is 059 MPa (6kgf/cm2).

Variants

SP 10
SP 25

Approvals and Certifications

All Teryair metal pumps are CE marked and manufactured under an ISO 9001:2015 Quality system – SGS.
Teryair metal pumps explosion proof Certification (ATEX) is under application and expected by September 2020

Versatality

This pump handles Viscous fluids, Slurries, Solid laden fluids, Shear Sensitive fluids very well.
No Priming needed
No Foaming of fluid pumped
No Stall damages
Portable
Submerged operation capable

FEATURES for SP 10/25 Centrifugal Pump

Main Features for SP10 / SP 25 Centrifugal Pump
- Will pump down to 22mm will handle up to 3mm solids governor controlled motor compact design enables uses in restricted areas.
- Air inlet operated by gate valve lever.
Applications of SP10 / SP 25 Centrifugal Pump
- Used in the Construction, De-watering and Engineering industry.
- Transfer of fluids, usage in sumps for periodic de watering.
- Marine- emptying ballast tanks, after washing procedure.
- Draining cargo holds during and after washing procedure.
- Pumping of sea water from bilges, holds, etc.

TECHNICAL DATA for SP 10/25 Centrifugal Pump

Teryair Model No	SP 10	SP 25
IMPA Code	59 16 35 / 59 16 36	59 16 37
Capacity - Total Head - Discharge	27 meter 48 m3/hour	24 meter 60 m3/hour
Max Air Consumption	2.7 m3/min	3.5 m3/min
Air Hose	3/4" NPT	3/4" NPT
Fluid Outlet	2" Hose	2-1/2" Hose
Weight	22 kgs	32 kgs
Min Opening Pump will enter	204mm x 230mm	210mm x 305 mm